★ Find a new page on our Untranscribed Manuscripts list.
No edit summary |
No edit summary |
||
| (3 intermediate revisions by one other user not shown) | |||
| Line 4: | Line 4: | ||
<head>Transferring</head><lb/> | <head>Transferring</head><lb/> | ||
<p>The Writing on Drawing having been prepared on Transfer<lb/> | <p>The Writing on Drawing having been prepared on Transfer<lb/> | ||
Paper pursuant to the Instructions marked | Paper pursuant to the Instructions marked 18 the<lb/> | ||
Stone with a perfectly true and smooth face may be laid<lb/> | Stone with a perfectly true and smooth face may be laid<lb/> | ||
in the | in the Press<lb/> | ||
</p> | </p> | ||
<p>In order to ascertain the degree of pressure, which for<lb/> | |||
transferring should be moderate, lay a piece of clean<lb/> | |||
paper on the face of the Stone, then a couple of pieces<lb/> | |||
of soft paper and the oiled board. The Tympan Frame<lb/> | |||
is then turned down and the carriage placed under<lb/> | |||
the <unclear>scraper</unclear>, which must have a true edge a little rounded,<lb/> | |||
The pressure is increased or diminished by the screw in<lb/> | |||
the centre. After this has been done, The Transfer Sheet<lb/> | |||
may be carefully damped on the back with a weak<lb/> | |||
solution of Nitric Acid and Water. It may then be<lb/> | |||
carefully placed on the Stone the soft paper & oiled<lb/> | |||
board over it, The Tympan turned down as before<lb/> | |||
and the pressure applied.</p> | |||
<!-- DO NOT EDIT BELOW THIS LINE --> | <!-- DO NOT EDIT BELOW THIS LINE --> | ||
{{Metadata:{{PAGENAME}}}}{{ | {{Metadata:{{PAGENAME}}}}{{Completed}} | ||
Transferring
The Writing on Drawing having been prepared on Transfer
Paper pursuant to the Instructions marked 18 the
Stone with a perfectly true and smooth face may be laid
in the Press
In order to ascertain the degree of pressure, which for
transferring should be moderate, lay a piece of clean
paper on the face of the Stone, then a couple of pieces
of soft paper and the oiled board. The Tympan Frame
is then turned down and the carriage placed under
the scraper, which must have a true edge a little rounded,
The pressure is increased or diminished by the screw in
the centre. After this has been done, The Transfer Sheet
may be carefully damped on the back with a weak
solution of Nitric Acid and Water. It may then be
carefully placed on the Stone the soft paper & oiled
board over it, The Tympan turned down as before
and the pressure applied.
|
Identifier: | JB/109/019/001"JB/" can not be assigned to a declared number type with value 109. |
|||
|---|---|---|---|
|
109 |
|||
|
019 |
Lithographic Instructions |
||
|
001 |
|||
|
Complete work |
12 |
||
|
recto |
|||
|
Also stamped 109-018 and 109--020 but is all the same work; a short bound booklet on lithography |
35674 |
||
